Accuracy
The table below shows the accuracy of TX specifications.
Accuracy
unit: mm
| Model and size | Stroke length | Positioning Repeatability |
Positioning accuracy |
Lost motion(1) |
Parallelism in table motion A |
Attitude accuracy (2) sec |
Straightness in vertical Straightness in horizontal |
Squareness or XY motion |
||
|---|---|---|---|---|---|---|---|---|---|---|
| X-axis | Y-axis | |||||||||
| Single-axis specification | TX120M | 100 | ±0.0005 (±0.001) |
0.003 (0.006) |
0.001 | 0.005 | 5 | 0.003 | － | |
| 150 | ||||||||||
| 200 | 0.004 (0.008) |
0.006 | 6 | 0.004 | ||||||
| 250 | ||||||||||
| 300 | ||||||||||
| TX220M | 150 | ±0.0005 (±0.001) |
0.003 (0.006) |
0.001 | 0.005 | 5 | 0.003 | － | ||
| 200 | 0.004 (0.008) |
0.006 | 6 | 0.004 | ||||||
| 250 | ||||||||||
| 300 | ||||||||||
| 400 | 0.005 (0.013) |
0.007 | 7 | 0.005 | ||||||
| TX320M | 300 | ±0.0005 (±0.001) |
0.004 (0.008) |
0.001 | 0.006 | 6 | 0.004 | － | ||
| 400 | 0.005 (0.013) |
0.007 | 7 | 0.005 | ||||||
| 500 | ||||||||||
| TX420M | 500 | ±0.0005 (±0.001) |
0.005 (0.013) |
0.001 | 0.007 | 7 | 0.005 | － | ||
| 600 | 0.006 (0.016) |
0.008 | 8 | 0.006 | ||||||
| 800 | 0.008 (0.020) |
0.009 | 9 | 0.008 | ||||||
| Two-axis specification | CTX120M | 100 | 100 | ±0.0005 (±0.001) |
0.005 (0.007) |
0.001 | 0.008 | 8 | 0.005 | 0.005 |
| 200 | 100 | 0.005 (0.010) |
0.010 | |||||||
| 200 | 200 | |||||||||
| 300 | 200 | |||||||||
| CTX220M | 200 | 200 | ±0.0005 (0.001) |
0.006 (0.010) |
0.001 | 0.009 | 9 | 0.006 | 0.005 | |
| 300 | 200 | 0.010 | ||||||||
| 300 | 300 | |||||||||
| 400 | 300 | 0.008 (0.010) |
0.011 | 11 | 0.008 | |||||
| Notes(1) | When no linear encoder is used, this represents the value for backlash. |
| (2) | This represents accuracy in pitching and yawing. |
| Remark: | The values in （ ） indicate values without a linear encoder. |
Maximum speed
The table below shows the maximum speeds for various TX specs.Consult IKO when considering using at speeds exceeding the maximum speed.
Maximum speed attained when a motor manufactured by YASKAWA ELECTRIC CORPORATION is used (with incremental linear encoder)
| Designation of linear encoder |
Resolution μm/pulse |
Maximum speed mm/s | Linear encoder | Serial conversion unit(1) |
|
|---|---|---|---|---|---|
| Lead 5mm | Lead 10mm | ||||
| SA000 | 0.0156 | 62.5 | 62.5 | HEIDENHAIN K.K. LIF181R |
Yaskawa Electric Corporation JZDP-H003-000 |
| 0.0312 | 125 | 125 | |||
| 0.0625 | 250(224) | 250(224) | |||
| 0.125 | 500(448) | ||||
| 0.250 | |||||
| 0.500 | |||||
| SC000 | 0.0781 | 250(224) | 312.5 | Renishaw plc. TONiC |
Yaskawa Electric Corporation JZDP-H005-000 |
| 0.156 | 500(448) | ||||
| 0.312 | |||||
| 0.625 | |||||
| 1.25 | |||||
| 2.5 | |||||
| Note(1) | Serial conversion unit is attached. |
| Remarks |
|
Maximum speed attained when a motor manufactured by Mitsubishi Electric Corporation or Panasonic Corporation is used (with incremental linear encoder)
| Designation of linear encoder |
Resolution μm/pulse |
Maximum speed mm/s | Linear encoder | Linear encoder signal conversion uni (1) |
|
|---|---|---|---|---|---|
| Lead 5mm | Lead 10mm | ||||
| SB010 | 0.01 | 40(2) | 40(2) | HEIDENHAIN K.K. LIF181R |
HEIDENHAIN K.K. IBV3271 100F(2) |
| SB020 | 0.02 | 80(2) | 80(2) | HEIDENHAIN K.K. IBV3271 50F(1) |
|
| SB040 | 0.04 | 160(2) | 160(2) | HEIDENHAIN K.K. IBV3271 25F(1) |
|
| SB050 | 0.05 | 200(2) | 200(2) | HEIDENHAIN K.K. IBV3271 20F(1) |
|
| SB100 | 0.1 | 250(224) | 400(2) | HEIDENHAIN K.K. IBV3171 10F(1) |
|
| SB200 | 0.2 | 250(224) | 500(448) | HEIDENHAIN K.K. IBV3171 5F(1) |
|
| SD010 | 0.01 | 40 | 40 | Renishaw plc. VIONiC |
－ |
| SD020 | 0.02 | 80 | 80 | ||
| SD040 | 0.04 | 160 | 160 | ||
| SD050 | 0.05 | 200 | 200 | ||
| SD100 | 0.1 | 250(224) | 400 | ||
| SD200 | 0.2 | 250(224) | 500(448) | ||
| Notes(1) | A linear encoder signal conversion unit corresponding to resolution is attached （Made by HEIDENHAIN K.K） |
| (2) | Because the allowable value of the linear encoder signal conversion unit maximum response frequency is ±5%, the maximum speed may decrease by 5%. |
| Remarks |
|
Maximum speed attained when a motor manufactured by Yaskawa Electric Corporation, Mitsubishi Electric Corporation, or Panasonic Corporation is used (with absolute linear encoder
| Designation of linear encoder |
Resolution μm/pulse |
Maximum speed mm/s | Linear encoder | Linear encoder signal conversion unit |
|
|---|---|---|---|---|---|
| Lead 5mm | Lead 10mm | ||||
| SE050 | 0.05 | 250(224) | 500(448) | Renishaw plc. RESOLUTE |
－ |
| SF050 | 0.05 | 250(224) | 500(448) | ||
| SG050 | 0.05 | 250(224) | 500(448) | ||
| Remarks |
|
Maximum speed attained when no linear encoder is used
| Motor type | Model and size | Maximum speed mm/s | |
|---|---|---|---|
| Lead 5mm | Lead 10mm | ||
| AC servo motor | TX120M | 250 | 500 |
| TX220M | |||
| TX320M | 224 | 448 | |
| TX420M | |||
| Stepper motor | TX120M | 150 | 300 |
| TX220M | |||
| TX320M | |||
| Remark: | The values of respective axes in tables of two-axis specification are the same as those of tables of single-axis specification. |
Maximum carrying mass
The table below shows the Maximum carrying mass.Consult IKO when considering using the product under loads exceeding Maximum carrying mass.
Maximum carrying mass
| Model and size | Ball screw lead mm |
Carrying mass position mm |
Maximum carrying mass Kg | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Length L Horizontal direction |
Length L Vertical direction |
|||||||||
| Height H | 0 | 100 | 200 | 300 | 0 | 100 | 200 | 300 | ||
| TX120M | 5 | 0 | 254 | 97 | 57 | 40 | 28 | 28 | 28 | 28 |
| 100 | 254 | 96 | 57 | 40 | 28 | 28 | 28 | 28 | ||
| 200 | 254 | 95 | 56 | 40 | 28 | 28 | 28 | 28 | ||
| 300 | 233 | 92 | 56 | 40 | 28 | 28 | 28 | 26 | ||
| 10 | 0 | 154 | 76 | 44 | 31 | 28 | 28 | 28 | 28 | |
| 100 | 154 | 74 | 44 | 31 | 28 | 28 | 28 | 27 | ||
| 200 | 154 | 70 | 43 | 31 | 28 | 28 | 28 | 24 | ||
| 300 | 129 | 65 | 41 | 30 | 28 | 26 | 23 | 20 | ||
| TX220M | 5 | 0 | 382 | 263 | 167 | 123 | 30 | 30 | 30 | 30 |
| 100 | 382 | 261 | 167 | 122 | 30 | 30 | 30 | 30 | ||
| 200 | 382 | 258 | 166 | 122 | 30 | 30 | 30 | 30 | ||
| 300 | 382 | 254 | 165 | 122 | 30 | 30 | 30 | 30 | ||
| 10 | 0 | 187 | 187 | 131 | 96 | 29 | 29 | 29 | 29 | |
| 100 | 187 | 187 | 130 | 95 | 29 | 29 | 29 | 29 | ||
| 200 | 187 | 187 | 127 | 94 | 29 | 29 | 29 | 29 | ||
| 300 | 187 | 183 | 124 | 93 | 29 | 29 | 29 | 29 | ||
| TX320M | 5 | 0 | 536 | 536 | 536 | 473 | 27 | 27 | 27 | 27 |
| 100 | 536 | 536 | 536 | 472 | 27 | 27 | 27 | 27 | ||
| 200 | 536 | 536 | 536 | 471 | 27 | 27 | 27 | 27 | ||
| 300 | 536 | 536 | 536 | 469 | 27 | 27 | 27 | 27 | ||
| 10 | 0 | 254 | 254 | 254 | 254 | 25 | 25 | 25 | 25 | |
| 100 | 254 | 254 | 254 | 254 | 25 | 25 | 25 | 25 | ||
| 200 | 254 | 254 | 254 | 254 | 25 | 25 | 25 | 25 | ||
| 300 | 254 | 254 | 254 | 254 | 25 | 25 | 25 | 25 | ||
| TX420M | 5 | 0 | 519 | 519 | 519 | 519 | 10 | 10 | 10 | 10 |
| 100 | 519 | 519 | 519 | 519 | 10 | 10 | 10 | 10 | ||
| 200 | 519 | 519 | 519 | 519 | 10 | 10 | 10 | 10 | ||
| 300 | 519 | 519 | 519 | 519 | 10 | 10 | 10 | 10 | ||
| 10 | 0 | 237 | 237 | 237 | 237 | 8 | 8 | 8 | 8 | |
| 100 | 237 | 237 | 237 | 237 | 8 | 8 | 8 | 8 | ||
| 200 | 237 | 237 | 237 | 237 | 8 | 8 | 8 | 8 | ||
| 300 | 237 | 237 | 237 | 237 | 8 | 8 | 8 | 8 | ||
| Remark: | The maximum carrying mass is adjusted by the mass when the rating life of the linear motion rolling guide, ball screws, or bearings is 18,000 hours during continuous operation at a number of revolutions of the motor of 3000min-1 and an acceleration/deceleration time of 0.2s. The mass calculated is based upon the basic static load rating of the linear motion rolling guide. |
Some products are not shown in the catalogue. Also, modifications can be made to meet your requirements. Please do not hesitate to make inquiries.
