Specification｜Precision Positioning Table LH TSLH･･･M/CTLH･･･M

Accuracy

The table below shows the accuracy of TSLH specifications.

Accuracy

unit: mm

Model and size		Stroke length		Positioning repeatability	Positioning accuracy	Parallelism in table motion A	Straightness	Squareness of XY motion	Backlash
Model and size		X-axis	Y-axis	Positioning repeatability	Positioning accuracy	Parallelism in table motion A	Straightness	Squareness of XY motion	Backlash
Single-axis specification	TSLH120M	100		±0.002	0.010	0.010	0.005	－	0.001
		150			0.010	0.010
		200			0.015	0.015
		250			0.015	0.015	0.010
		300			0.020	0.020	0.010
	TSLH220M	150		±0.002	0.010	0.010	0.005	－	0.001
		200			0.015	0.015
		250
		300
		400			0.020	0.020	0.010
	TSLH320M	300		±0.002	0.015	0.015	0.005	－	0.001
		400			0.020
		500			0.020
	TSLH420M	500		±0.002	0.025	0.025	0.015	－	0.001
		600			0.030	0.030	0.015
		800			0.035	0.035	0.020
Two-axis specification	CTLH120M	100	100	±0.002	0.015	0.015	0.005	0.005	0.001
		200	100		0.020	0.020	0.010	0.010
		200	200		0.020	0.025	0.010
		300	200		0.030	0.030	0.025
		300	300		0.030	0.030	0.025
	CTLH220M	200	200	±0.002	0.020	0.025	0.010	0.010	0.001
		300	200
		300	300
		400	300		0.030	0.035	0.020	0.015
		400	400		0.030	0.035	0.020	0.015
	CTLH320M	300	300	±0.002	0.020	0.020	0.005	0.010	0.001
		400	300		0.025	0.025	0.010	0.015
		400	400		0.025
		500	400		0.030
		500	500		0.030

Maximum speed

The table below shows the maximum speeds for various TSLH specs.Consult IKO when considering using at speeds exceeding the maximum speed.

Maximum speed

Motor type	Model and size		Maximum speed mm/s
Motor type	Single-axis specification	Two-axis specification	Lead 5mm	Lead 10mm
AC servo motor	TSLH120M TSLH220M	CTLH120M CTLH220M	250	500
AC servo motor	TSLH320M TSLH420M	CTLH320M	224	448
Stepper motor	TSLH120M TSLH220M TSLH320M	CTLH120M CTLH220M CTLH320M	150	300

Remark:

To measure the practical maximum speed, it is required to consider operation patterns based on the motor to be used and load conditions.

Maximum carrying mass ?

The table below shows the Maximum carrying mass.Consult IKO when considering using the product under loads exceeding Maximum carrying mass.

Maximum carrying mass ?

Model and size	Ball screw lead mm	Carrying mass position mm	Maximum carrying mass Kg
		Carrying mass position mm	Length L Horizontal direction				Length L Vertical direction
		Height H	0	100	200	300	0	100	200	300
TSLH120M	5	0	135	82	48	34	28	28	28	28
		100	135	82	48	34	28	28	28	26
		200	135	81	48	34	28	28	28	23
		300	135	79	47	34	28	28	24	20
	10	0	135	63	36	26	28	28	28	23
		100	135	61	36	25	28	28	28	20
		200	135	58	35	25	28	28	23	17
		300	111	54	34	25	26	21	18	15
TSLH220M	5	0	218	218	141	103	30	30	30	30
		100	218	218	140	103	30	30	30	30
		200	218	218	140	103	30	30	30	30
		300	218	214	139	102	30	30	30	30
	10	0	187	170	108	79	29	29	29	29
		100	187	167	107	78	29	29	29	29
		200	187	161	105	77	29	29	29	29
		300	187	153	102	76	29	29	29	29
TSLH320M	5	0	536	536	498	378	27	27	27	27
		100	536	536	496	377	27	27	27	27
		200	536	536	494	376	27	27	27	27
		300	536	536	491	375	27	27	27	27
	10	0	254	254	254	254	25	25	25	25
		100	254	254	254	254	25	25	25	25
		200	254	254	254	254	25	25	25	25
		300	254	254	254	254	25	25	25	25
TSLH420M	5	0	519	519	519	437	10	10	10	10
		100	519	519	519	437	10	10	10	10
		200	519	519	519	436	10	10	10	10
		300	519	519	519	435	10	10	10	10
	10	0	237	237	237	237	8	8	8	8
		100	237	237	237	237	8	8	8	8
		200	237	237	237	237	8	8	8	8
		300	237	237	237	237	8	8	8	8

Remark:

The maximum carrying mass is adjusted by the mass when the rating life of the linear motion rolling guide, ball screws, or bearings is 18,000 hours during continuous operation at a number of revolutions of the motor of 3000min-1 and an acceleration/deceleration time of 0.2s. The mass calculated is based upon the basic static load rating of the linear motion rolling guide.

Product Related Inquiries

Some products are not shown in the catalogue. Also, modifications can be made to meet your requirements. Please do not hesitate to make inquiries.

LH Features

Precision Positioning Table LH (TSLH/CTLH) is a positioning table featuring high reliability, high accuracy, and high rigidity. The slide table and bed are made of cast iron, and therefore have high rigidity and superior vibration damping characteristics. IKO Linear Ways are integrated along with a precision ball screw as the drive mechanism. With the parallel arrangement of two sets of Linear Ways, this table provides stable and high running and positioning accuracy, as well as high load capacity. This series includes four sizes with table widths ranging from 120 mm to 420 mm (super large size). Two axis tables which combine single axis tables are also available in this series.
This table is most suitable for use as a high accuracy positioning mechanism with a large applied load and a relatively long stroke.