Specification
The performance of NT90XZH is shown in the table below.
Specification / Performance of NT･･･XZH
| Item | Model and size | ||||||
|---|---|---|---|---|---|---|---|
| NT90XZH2510 | |||||||
| X-axis | Z-axis | ||||||
| Maximum thrust（1） | N | 70 | |||||
| Rated thrust（2） | N | Natural air cooling: 16 Air cooling（6）：20 | |||||
| Maximum load mass | Kg | 0.2 | |||||
| Effective stroke length | mm | 25 | 10 | ||||
| Resolution | μm | 0.1 | 0.5 | 0.1 | 0.5 | ||
| Maximum speed（3） | mm/s | 270 | 1000（7） | 1300 | 270 | 1000（7） | 1000 |
| Positioning repeatability(4) | μm | ±0.5 | |||||
| Mass of moving table | Kg | 0.38 | 0.35 | ||||
| Total mass(5) | Kg | 2.8 | |||||
| Ambient temperature and humidity in operation |
0～40℃･20～80％RH（keep dewdrop free） | ||||||
| Notes(1) | The duration of maximum thrust is up to 1 second. |
| (2) | This is based on the case of mounting on a metal mating member material at an ambient temperature of 20℃. |
| (3) | This maximum speed may not be reached depending on the maximum output frequency of the controller used, and the driver type or settings. |
| (4) | When the temperature of the product is constant. |
| (5) | Mass of the cord is not included. |
| (6) | This is under air flow of 20NL/min. |
| (7) | Applicable to high speed specification. |
| (8) | Mass of moving table of Z-axis is included. |
Some products are not shown in the catalogue. Also, modifications can be made to meet your requirements. Please do not hesitate to make inquiries.
