Specification｜Precision Positioning Table TE｜Mechatronics Series

Accuracy

The table below shows the accuracy of TE specifications.

Accuracy

unit: mm

Model and size	Bed length	Positioning repeatability	Positioning accuracy (1)	Parallelism in table motion B	Backlash(1)
TE50B	150	±0.002 (±0.020)	0.035	0.008	0.005
	200		0.035
	250		0.040
	300		0.040
	400		0.045	0.010
	500		0.045	0.012
TE60B	150	±0.002 (±0.020)	0.035	0.008	0.005
	200		0.035
	300		0.040
	400		0.045
	500		0.045	0.010
	600		0.050	0.010
	700		0.060	0.012
TE86B	340	±0.002 (±0.020)	0.040	0.008	0.005
	440		0.045	0.010
	540		0.050	0.010
	640		0.050	0.012
	740		0.055	0.012
	840		0.065	0.014
	940		0.065	0.016

Note（1）	This does not apply to table of motor folding back specification.
Remark:	The values in （） are reference values provided that the timing belt tension is properly adjusted in motor folding back specification table.

Maximum speed

The table below shows the maximum speeds for various TE specs.Consult IKO when considering using at speeds exceeding the maximum speed.

Maximum speed

Motor type	Model and size	Bed length mm	Maximum speed　mm/s
Motor type	Model and size	Bed length mm	Lead 4mm	Lead 5mm	Lead 8mm	Lead 10mm	Lead 20mm
AC servomotor	TE50B	300 or less	400	－	800	－	－
		400	－	－	800	－	－
		500	－	－	620	－	－
	TE60B	500 or less	－	500	－	1000	－
		600	－	350	－	710	－
		700	－	－	－	－	960
	TE86B	540 or less	－	－	－	930	1860
		640	－	－	－	830	1630
		740	－	－	－	590	1170
		840	－	－	－	440	880
		940	－	－	－	340	690
Stepper motor	TE50B	300 or less	120	－	240	－	－
		400	－	－	240	－	－
		500	－	－	240	－	－
	TE60B	600 or less	－	150	－	300	－
	TE60B	700	－	－	－	－	600
	TE86B	940 or less	－	－	－	300	600

Remark:

To measure the practical maximum speed, it is required to consider operation patterns based on the motor to be used and load conditions.

Maximum carrying mass ?

The table below shows the Maximum carrying mass.Consult IKO when considering using the product under loads exceeding Maximum carrying mass.

Maximum carrying mass ?

Model and size	Ball screw lead mm	Carrying mass position mm	Maximum carrying mass　Kg
		Carrying mass position mm	Length　L Horizontal direction				Length　L Vertical direction
		Height　H	0	100	200	300	0	100	200	300
TE50B	4	0	12	8	4.4	3.0	11	7	3.8	2.6
		100	12	8	4.2	2.9	6	4.0	2.8	2.1
		200	12	7	4.1	2.8	3.6	2.8	2.1	1.7
		300	12	6	3.9	2.7	2.5	2.1	1.7	1.4
	8	0	12	7	4.0	2.7	7	5	2.9	2.0
		100	12	6	3.7	2.5	5	3.4	2.3	1.7
		200	12	6	3.4	2.4	2.8	2.2	1.8	1.4
		300	11	5	3.2	2.3	1.9	1.6	1.4	1.2
TE60B	5	0	17	14	7	4.9	13	10	5	3.8
		100	17	13	7	4.8	9	6	4.4	3.2
		200	17	12	6	4.6	5	4.2	3.5	2.8
		300	17	11	6	4.4	3.7	3.1	2.7	2.4
	10	0	17	12	6	4.4	8	8	4.3	3.0
		100	17	10	6	4.1	7	5	3.4	2.5
		200	17	9	5	3.9	4.1	3.3	2.7	2.1
		300	13	8	5	3.7	2.8	2.4	2.1	1.8
	20	0	17	9	5	3.6	7	5	3.2	2.2
		100	13	6	4.3	3.2	5	3.7	2.5	1.8
		200	7	4.9	3.5	2.7	3.0	2.4	1.9	1.5
		300	5	3.9	3.0	2.4	2.1	1.7	1.5	1.3
TE86B	10	0	36	36	19	12	18	18	13	9
		100	36	31	17	12	18	15	10	7
		200	36	26	16	11	12	10	8	6
		300	36	23	14	10	9	7	6	5
	20	0	29	28	15	10	10	10	10	6
		100	29	19	13	9	10	10	7	5
		200	23	15	11	8	9	7	6	5
		300	17	12	9	7	6	5	4.8	4.3

Remarks

The value is for one flange type standard table.
The maximum carrying mass is adjusted by the mass when the rating life of the linear motion rolling guide, ball screws, or bearings is 18,000 hours during continuous operation at a number of revolutions of the motor of 3000min-1 and an acceleration/deceleration time of 0.2s. The mass calculated is based upon the basic static load rating of the linear motion rolling guide.

Product Related Inquiries

Some products are not shown in the catalogue. Also, modifications can be made to meet your requirements. Please do not hesitate to make inquiries.

TE Features

IKO Precision Positioning Table TE is a lightweight and compact positioning table using a high-strength aluminum alloy for its main components with a slide table assembled inside a U-shaped bed. Use of a Precision ball screw for the feeding mechanism guarantees high reliability and high accuracy positioning. The product is long term maintenance free by integrating IKO's C-Lube internal lubrication system within the linear motion rolling guide and ball screw, reducing the frequency of relubrication. Various specifications such as ball screw lead, motor type and sensor mounting can be configured, so that an ideal positioning table can be created according to usage.
Ideal for a wide range of usages from devices requiring high positioning accuracy to general conveying, such as part processing, assembly, inspection and conveying equipment, etc.