Accuracy
The table below shows the accuracy of TSLB specifications.
Accuracy
unit: mm
| Model and size | Stroke length | Positioning repeatability | Parallelism in table motion B |
|---|---|---|---|
| TSLB 90 | 300 | ±0.070 | 0.050 |
| 400 | |||
| 500 | |||
| 600 | 0.070 | ||
| TSLB120 | ±0.100 | 0.070 | |
| TSLB170 | ±0.100 | 0.070 | |
Maximum speed
The table below shows the maximum speeds for various TSLB specs.Consult IKO when considering using at speeds exceeding the maximum speed.
Maximum speed and resolution
| Model and size | Maximum speed（1） mm/s |
Resolution（2） mm |
|---|---|---|
| TSLB 90 TSLB120 TSLB170 |
1500 | 0.1 |
| Notes（1） | To measure the practical maximum speed, it is required to consider operation patterns based on the motor to be used and load conditions. |
| （2） | This is a value given when the number of fraction sizes of the motor is 1,000 pulses/rev. |
Maximum carrying mass
The table below shows the Maximum carrying mass.Consult IKO when considering using the product under loads exceeding Maximum carrying mass.
Maximum carrying mass
| Model and size | Carrying mass position mm |
Horizontal direction Maximum carrying mass Kg |
|||
|---|---|---|---|---|---|
| Length L | |||||
| Height H | 0 | 100 | 200 | 300 | |
| TSLB 90 | 0 | 5 | 2.0 | 1.1 | 0.7 |
| 100 | 1.3 | 1.0 | 0.7 | 0.6 | |
| 200 | 0.7 | 0.6 | 0.5 | 0.4 | |
| 300 | 0.5 | 0.4 | 0.4 | 0.3 | |
| TSLB120 | 0 | 62 | 18 | 9 | 6 |
| 100 | 16 | 11 | 7 | 5 | |
| 200 | 9 | 7 | 6 | 5 | |
| 300 | 6 | 5 | 4.9 | 4.2 | |
| TSLB170 | 0 | 46 | 17 | 9 | 6 |
| 100 | 15 | 10 | 7 | 5 | |
| 200 | 9 | 7 | 5 | 4.9 | |
| 300 | 6 | 5 | 4.7 | 4.1 | |
| Remark: | "Maximum carrying mass" is calculated based on : 1. the mass that makes the rated life of the linear motion rolling guide 18000 hours when the motor runs at a maximum 900min-1 with acceleration/deceleration time of 0.2s, and 2. the basic static load rating and safety factor of the linear motion rolling guide. |
Some products are not shown in the catalogue. Also, modifications can be made to meet your requirements. Please do not hesitate to make inquiries.
LB Features
Precision Positioning Table LB is a positioning table capable of long stroke and high speed which uses a timing belt with high tensile steel core for the driving mechanism, and a high torque 5-phase stepper motor as the driving motor. Slide table and bed are made of a lightweight high-strength aluminum alloy. Also, two IKO Linear Ways are mounted in parallel, which provides stable and accurate running performance.
